Operator’s manual
Rotary tedder
P4-420
,
P4-471
and
P4-531
Rotary tedder
P6-651
and
P6-771
Rotary tedder
P8-790
and
P8-890
- 25 -
WARNING!
Do not unfold the tedder on sloping terrain (
Fig. 17
). If the tedder's arm is
blocked on sloping terrain, the actuator in the land following opening could
become blocked. If you continue unfolding when the actuator's movement is
blocked, the tedder's assemblies could become damaged by the ejection force
(
Fs
) of the actuator.
WARNING!
Only unfold the
P8
tedder on level ground. Unfolding on a slope can lead to
damage of an actuator or machine components (
Fig. 17
).
Fig. 17.
Danger of blockage of the actuator when unfolding the tedder on a slope
5.6.
Switching 6-rotary tedder from transport position (for loading) to working position
WARNING!
Moving the tedder to and from operating position from the transport position
should only take place on even and stable ground. Prior to making the moves
make sure whether there are no unauthorized persons exposed to any
hazardous moving parts.
Due to permissible loading height for trucks tedder
P6
is prepared for transport in special
manner (
Fig. 18a
).
In order to prepare the machine for loading dismount pin
A
from eye found in shaft’s housing
B
(
Fig. 18b
) and position two extreme most rotors vertically.
Fig. 18.
Tedder P6-651 in compact position for transport on public roads
F
s
a)
b)
B
A
