Operating manual
Tractor mounted snow plow
PSV, PSV Up, PSV Up H
- 10-
In order to mount the plow on the tractor:
approach the plow so that the lower lifting arms of the three point hitch are inserted into the
mountings of the plow's suspension,
secure the mounting using pins and cotter pins,
connect the upper part of the suspension system using a regulated tie and secure them with a
pin and cotter pin (
Fig. 6
),
next connect the hydraulic connections and the power plug along with the control switch,
the rotation axis of the moldboards should be perpendicular to the ground,
after lifting the plow the support foot should be lifted and secured with a pin,
if the plow has been equipped with support wheels or skids they should be adjusted to the
correct height.
Fig. 6.
Connecting the
PSV
plow on a cat. II three point hitch.
A – Pins with cotter pins, B – Hydraulic connections, C – Support foot, D – Electric outlet,
E – Lower TPH arms, F – Upper TPH regulated tie, G - Rotation axis of the moldboards
ATTENTION!
The manufacturer is not responsible for damages to the device resulting from
improper mounting of the plow on the TPH of the tractor. During operation
periodically check weather the plow is still properly mounted.
Frame PSV cat. I/II
with unattached lugs
Plate PSV for
development
Frame PSV
SMS
Frame PSV
EURO
90
G
D
C
A
E
F
B
