4
RAM
SNOW PLOW
OPERATOR’S MANUAL
1.
IDENTIFICATION
Every snow plow can be clearly identified using the identification plate which is permanently attached
to the suspension body, as is shown below
Fig. 1.
Data plate and its placement
Data plate includes:
❑
name and adress of the manufacturer,
❑
model year,
❑
CE marking means, that the produce conforms to
❑
version number,
2006/42/EC Directive and harmonized standards,
❑
machine weight,
❑
machine symbol,
❑
id number,
❑
date of manufacture,
❑
barcode.
ATTENTION!
The data plate is a document and it is forbidden to change it or to allow it to
become illegible.
UWAGA!
The data plate contains essential information necessary when contacting the
manufacturer in the event of any questions or doubts.
UWAGA!
When ordering spare parts for a device, please include data from the data plate
of that device: name, model, serial number and date of manufacture.
2.
INTRODUCTION
❑
The Operating Manual should be considered an integral part of the machine. When handing over the
machine to a new user, it must be in good repair and complete with this Operating Manual and the
assigned essential equipment.
❑
Before you start operating the plow, read and understand this Operating Manual and the general
work safety regulations.
❑
The machine has been designed and built in compliance with applicable safety standards.
❑
Compliance with the guidelines of this Operating Manual will ensure full operating safety.
❑
If you have any doubts about starting up and operating the machine, consult the manufacturer.
