Operating manual
Tractor mounted snow plow
Smart (K), Lite 150, Uni
-
22
-
10.
DISASSEMBLY AND DISPOSAL
WARNING!
During assembly and disassembly please remember about body
protection and environmental protection.
2.5.
Disassembly
In the event of partial wearing out of the snow plow it should be repaired by replacing worn-
out components. In order to accomplish this, the plow should be carefully cleaned and washed. If
necessary drain the oil into a watertight container or plug up the connecting fittings. Next replace
the worn-out parts with new ones using new connections, hardware and gaskets. The bolts should
be tightened according to the class of their (
Tab. 7
).
During assembly and disassembly use extreme caution and use schematics from the spare
parts catalogue.
Damaged or worn-out parts should be kept in a designated place and then delivered to a
scrap yard or recycling center.
2.6.
Disposal
In the event when the plow is worn out to a level which does not allow its further operation, it
should be disposed of. In order to accomplish this, the plow should be carefully cleaned and
washed. First drain the oil from the hydraulic system and send off to be recycled. Next
disassemble the snow plow remembering to separate the parts according to the material they are
made of and deliver them to a scrap yard or a recycling center.
2.7.
The environment
The snow plow is fully environmentally friendly
Materials of the plow are in 95% recyclable.
Packing materials of the plow are 100% recyclable.
Worn-out plow parts and packaging should be recycled according to local recycling
regulations.
During the entire lifetime of the plow please be careful not to allow the oil to leak out of the
hydraulic system which could cause contamination of the natural environment.
