Operator's Manual
Round bale wrapper
Spin S, Spin F
- 8 -
NOTE:Failure to comply with above instructions may lead to serious injury or
death.
4.2.
Hazards
Description of residual risks
Residual risk results from incorrect actions of the wrapping machine‘s operator. The greatest
hazards occur during the following forbidden actions:
installation of the wrapping machine on tractors which do not meet the required minimum
criteria stated in this manual,
standing below raised lifting components of the machine,
standing in the machine‘s working area,
maintenance or repairs conducted with the tractor engine on,
use of damaged hydraulic lines,
machine operation by an operator standing outside the tractor‘s cabin,
operating a wrapping machine which is damaged or without protective covers in place,
operating the wrapping machine on slopes with an inclination exceeding 8°,
transporting bales of silage on the wrapping machine,
remaining on (aboard) the machine when it is working or during transport,
misuse of the wrapping machine,
leaving the wrapping machine unsecured on inclined terrain,
standing between the tractor and the machine while the engine is running.
With the aforementioned residual risks, the bale wrapping machine is regarded as a machine
which has been designed and built according to the current state of technology.
Assessment of residua rick
Follow these guidelines:
Read and understand the operating manual,
Do not stand below the raised lifting components of the machine,
Do not stand in the machine‘s working area,
The maintenance and repairs of the wrapping machine should performed at authorized service
workshops,
The machine should be used by trained and authorized operators, Protect the wrapping machine
from access by children and bystanders.
NOTE:The residual risks are present when the aforementioned manufacturer‘s
rules and indications are not followed.
During operation, the operator is not subject to noise which may cause the loss of
hearing, as the noise level of the machine does not exceed 70 dB and the operator works
inside the tractor‘s cabin.
During the operation, the operator is not subject to harmful vibration as the vibration
level transferred to the upper limbs does not exceed 2,5 m/s
2
, and the vibration level
transferred to the body is lower than 0,5 m/s
2
and the operator is positioned in the tractor‘s
cabin.
4.3.
Bale loading
The wrapping machine is suitable for road and rail transport using carriers with appropriate
load bearing capacity.
For loading on a means of road transport, use lifting devices with lifting capacity appropriate
for the machine’s weight including a loaded roll of film. It is forbidden to load the wrapping
machine with a bale of swat or silage on it. The transported wrapping machine must be securely
fastened to the carrier vehicle. It is forbidden to transport the wrapping machine with a bale of
silage or swath loaded on it.
