Operator's Manual
Round bale wrapper
Spin S, Spin F
- 24 -
Example of the L02 wrap counter indications
8.4.
Wrapping
8.4.1.
Wrapper SPIN S
To prepare the machine for work, it’s side wheel needs to be placed in its working position
following the diagram below (Fig. 25).
Fig. 25. a) transport position; b) working position, wheel rotated by 180°
To change the position of the side wheel, it is required to do the following:
Place the coupled wrapping machine so that the machine’s drawbar is paralel to the tractor’s
axis,
Remove the pin securing the side wheel and place it in tractor’s cabin,
Move the tractor and the wrapping machine slightly forward,
Manuallu turn the side wheel beyond its dead spot,
Gently move the tractor and the wrapping machine backwards until the side wheel’s position is
stable,
Correct the placement of the side wheel if necessary so that it is possible to enter the locking
pin,
Lock the side wheel using the locking pin,
Protect the pin using a safety pin.
a)
b)
