Operator's Manual
Round bale wrapper
Spin S, Spin F
- 26 -
Fig. 27. SPIN S bale loading
Fig. 28. SPIN F bale loading
Stop the tractor when the bale rests against the stop plate of the lateral loading arm. Lift the
grab arm until the bale rolls freely onto the wrapping machine rotary table. Lower the grabbing arm
to the bottom when the bale rests on the rotary table. Consecutive bales are loaded from the ground
to the wrapping machine rotary table in the same way.
Lower the grabbing arm to the bottom when the bale rests on the roatry table.
WARNING!
Before operation check:
Whether the wrapping machine drawbar is properly connected to the tractor transport
hitch,
Whether the power hydraulic lines are properly connected,
Whether the revolutions counter system is properly connected,
Raising and lowering of the loading arm,
Whether the rotary table is placed in its vertical and horizontal position correctly,
Smoothness and direction of the rotary frame and drums movement – the rotary
frame should rotate counterclockwise,
Tightening of the wrapping machine side wheel pins.
