Operator's Manual
Round bale wrapper
Spin S, Spin F
- 28 -
Fig. 29. Bale discharge a) SPIN S; b) SPIN F
In SPIN F bale wrapper during the unloading proces, the cutter cuts away the film. The bale
on the unloading unit rotation control level as shown in the Fig. 30. After unloading the bale, all
working components should return to their position. Another bale may now be loaded.
Fig. 30. Bale discharge – SPIN F
Correct discharge sequence in SPIN F: lifting of the unloading unit (1), tilting of the rotary
table (2), lowering of the unloading unit (3) and lowering of the rotary table (4) (Fig. 29b).
8.5.1.
Film cutting
If the film cutter fails to operate correctly, stop the wrapping machine, turn off the tractor
engine, remove the ignition key and engage the tractor parking brake. Adjust the cutter angle (1) in
relations to the film in the clamp (2). The adjustment is made using the tightening screw (3). When
the srew (3) is turned clockwise, the cutter angle in relations to the film is decreased and the other
way round.
a)
b)
