Doc.-ID: 160319-PT08BA-TG-ExCam IPQ1775 series_en_rev.01.docx, Seite 32 von 40
6
Network access and visualization
In the following the most important steps for the initial commissioning of the camera are
described. The configuration menu of the web surface allows an intuitive navigation and
offers several configuration possibilities. For a comprehensive user manual of the web
surface, please refer to the to the Axis user manual which can be found on the provided
USB stick or which can be accessed at:
http://www.axis.com/global/en/products/axis-q1775
Network access of the ExCam IPQ1775 is supported by most operating systems and
browsers. The recommended browsers are Internet Explorer with MS Windows, Safari
with Macintosh and Firefox with Windows and additional operating systems.
To carry out „video streaming“ via the Microsoft Internet Explorer, installing the “AXIS
Media Control” (AMC) is required. The installation request is executed during the initial
commissioning. In order to visualize the „H.264“ video streams, QuickTime
TM
is recom-
mended. For „Motion JPEG“ coded video streams, Java Applet is suggested which re-
quires JVM (J2SE) 1.5 or higher, or JRE (J2SE) 5.0 or higher.
At delivery, the ExCam IPQ1775 is set to the applicable net frequency (50Hz or 60Hz). If
the camera is used at a location with a differing net frequency, a flickering of the picture
might be noticeable, particularly in surroundings with fluorescent tubes. In such a case,
the applicable settings have to be carried out within the menu “System Options > Ad-
vanced > Plain Config”.
6.1
Browser Support
A list with the currently supported web browsers, operating systems, and required add-
ons can be viewed at:
http://www.axis.com/techsup/cam_servers/tech_notes/browsers.htm
