Doc.-ID: 160319-PT08BA-TG-ExCam IPQ1775 series_en_rev.01.docx, Seite 33 von 40
6.2
Assigning the IP address
The ExCam IPQ1775 is an Ethernet network camera requiring an IP address to access it.
Usually a DHCP server is integrated in most networks which automatically assigns an IP
address. In case there is no DHCP server available in the network, the ExCam
IPQ1775
’s default address “192.168.0.90” (subnet masking 255.255.255.0) is used.
With the “AXIS IP Utility“ it is possible to determine the IP address under Windows; the
included USB stick contains this application. It is also available for download:
http://www.samcon.eu/en/downloads/drivers-software/
In case it is not possible to assign the IP address, it might be necessary
to change the firewall settings!
The “AXIS IP Utility“ tool automatically recognizes all ExCam devices and displays them.
It can also be used to manually assign a static IP address. Please note that the ExCam
IPQ1775 network camera has to be installed within the same network segment (physical
subnet) as the computer on which the “AXIS IP Utility” tool is executed. For example, the
ExCam IPQ1775 network identification is
„Axis Q1775“ (q.v. figure 7.1). MAC address
and serial number are also determined and displayed so that a non-ambiguous identifica-
tion is possible.
Figure 7.1
– Axis IP Utility
ExCam IPQ1755
ExCam IPM3014
ExCam IP1354
