Doc.-ID: 160319-PT08BA-TG-ExCam IPQ1775 series_en_rev.01.docx, Seite 34 von 40
6.3
Password / Identification
The default user name is:
root
The default password is:
root
When a system reset of the equipment has been carried out, please follow the instruc-
tions below.
In order to allow access to the camera, the password for the standard administrator user
„root“ has to be determined. When accessing the camera for the first time, the dialog field
„Configure Root Password“ is displayed and the password can be determined there. For
security considerations, it is possible to use an encrypted HTTPS-connection requiring an
HTTPS certificate (see steps below).
For assigning the password via a standard HTTP connection, please just enter the pass-
word directly in the dialog window „Configure Root Password“.
For using an encrypted HTTPS connection when determining the password, please fol-
low the below steps:
1.
Click on the button „Create self-signed certificate“
2.
Enter the desired information and click „OK“. The certificate is issued and the
password can be entered. Please note that the entire data transfer of the ExCam
IPQ1775 will be encrypted
3.
Enter the desired password and repeat it in order to ensure correct spelling. Click
on “OK“ to configure that password
4.
Enter the username “root“ (it is not possible to delete the default administrator
user name „root“)
5.
Enter the pr
eviously determined password and click on „OK“. In case you have
forgotten the password, the ExCam IPQ1775 has to be reset to default settings
6.
Click on „Yes“ in order to install AMC (AXIS Media Control). After the completion
of the installation, it is possible to view the video streams with the Microsoft Inter-
net Explorer or Mozilla Firefox (administrator rights are required)
7.
The page „Live View“ of the ExCam IPQ1775 is now displayed. With the setup link
it is possible to open the menu options to allow personal camera settings
