Doc.-ID: 160319-PT08BA-TG-ExCam IPQ1775 series_en_rev.01.docx, Seite 8 von 40
2.2
Electrical parameters of the camera
Axis Q1775
Power supply:
PoE, IEEE 802.3af class 3
Reference power:
48 V DC (44...54 V DC)
Maximum power input:
11.2 W
2.3
Electrical parameters of the heating (optional)
DBK HP05-1/04-24
Power supply:
12…30 V DC
Reference power:
24 V DC
Maximum power input:
Depending on ambient temperature/ PTC*
characteristics (*P = K x A x T (K = 5.5 W/m
2
)
Typ L (T
AMB
≥
-30°):
Max. 20 W (1 x heating element HP05)
12.2 W continuous rating at -30° C
(inrush current peak > 2000 mA,
typical „inrush“ duration < 120 s)
Typ LL (T
AMB
≥
-60°C):
Max. 40 W (2 x heating elements HP05)
26.8 W continuous rating at -60° C
(inrush current peak > 4000 mA,
typical „inrush“ duration < 120 s)
2.4
System cable SKD
xx
Description:
Data transfer and power supply of the camera
module (DIN EN 60079-14 conform)
Shealth color:
Green (GN), similar RAL6018
Outer diameter:
9 mm ± 0.2 mm
Bending radius:
100 mm
Cable:
4 x 2 x AWG22/1 CAT.6a
Characteristics:
PUR halogen free, flame retardant, UV
resistant, chemical resistance, shielded
Interface:
P version: RJ-45 (EIA/TIA-568B) e.g.
Weidmueller IE-PS-RJ45-FH-BK, Phoenix
Contact VS-08-RJ45-5-Q/IP20 etc.
10BASE-T/100BASE-TX PoE
K version: 8x single pin twisted pair (solid
conductor 0.64 mm
2
, about 5 mm stripped)
1x shield (Cu braid 2.5 mm
2
, ferules)
10BASE-T/ 100BASE-TX PoE