SAMES KREMLIN
- 5 -
N° : 578.025.120-UK-1906
INSTALLATION DIAGRAM
Captions :
A Explosive area area 1 (Z1) or area 2 (Z2) :
spray booth
3
Fluid hose
B Non explosive area
4
Conductive
air hose (spraying air)
5
Air regulator
1
Pump
6
Air hose (control air)
2
Airmix
automatic gun
7
3 way-valve or electrovalve
1 - By means of a fluid hose (3), connect the gun fluid fitting to the pump. Tighten firmly the fittings.
2 - By means of a
conductive
air hose (4), connect the gun 'Spraying air' fitting (2) to an air regulator
(5) that can supply at least 3 bar / 43.5 psi (
spraying air).
3 - By means of an air hose (6), connect the gun 'Control air' fitting to the valve or the electrovalve (7)
that will control the opening and the closing of the gun.
A minimum pressure of 3 or 4 bar / 43.5 or 8 psi is necessary to control the gun
(
control air).
Nota : The gun (and its eventual base)
must be
grounded by,
at least,
one of the
three next solutions :
•
by means of the fixing device on the machine,
•
by means of the static conductive air hose,
•
by means of the conductive or static conductive fluid hose.
The ground resistance between the gun and the floor must be
≤ 1 MΩ.
