SAMES KREMLIN
- 1 -
N° : 578.226.110-UK-1709
CAUTION :
Before any intervention on the gun, shut off the compressed air supply and
depressurize the circuits controlling the opening of the gun.
The gun is manufactured under the ATEX agreement and can no be modfied.
SAMES KREMLIN will no be held responsible for any failure to comply with that
instruction.
Before removing a component of the gun, some precautions have to be taken :
-
Shut off the pump main supply,
-
Lock the gun trigger with the safety device,
-
Relieve pressure from circuit by opening pump pressure relief valve,
-
Carefully loosen the gun swivel.
IMPORTANT : never work on gun when connected to hose.
Always engage the trigger lock-off when gun is not spraying.
Before reassemblying the different components, some precautions must be taken :
-
Clean all the parts with the appropriate cleaning solvent and a brush.
-
Install new seals if it is necessary after having lubricated them with PTFE grease.
-
Install new parts if it is necessary.