SAMES KREMLIN
- 1 -
N° : 578.220.110-UK-1710
Safety instructions :
Never point the spray gun at anyone or at any part of the body. Never try to stop
the spray fan with any part of the body (hands, fingers…) or with rags.
The operator will need medical attention if the high pressure material spray is in
contact with the the body (eyes, fingers…).
Always depressurize air and hoses
before carrying out any servicing on the gun.
In order to protect the operator, protective clothing (gloves, respirator
mask, glasses, hearing protective earplug, clothes…) are required.
Use the equipment in a properly ventilated area.
This spray gun is a precision tool. Its correct functioning requires regular maintenance, carried out with
care. When it is carried out directly after use, the cleaning of the gun is faster and easier.
Never use metallic brushes, files or pliers when dismantling the gun.
SHORT DURATION SHUTDOWN (LESS THAN 3 HOURS)
Leave the equipment as it is. In any case, if the tip becomes a little clogged with material, it is best to
clean it with a brush and some solvent.
LONG DURATION SHUTDOWN
Shut off gun air and fluid supply.
Change material with solvent and trigger the gun to depressurize the product circuits and flush the
pump, the hoses and the gun.
Unscrew the aircap ring to remove the reversing tip, the flat tip or the Skill
™
tip. Put it in the solvent
to soak and then brush it clean. Remove the seat holder. Remove the needle gun frontwards. Soak
the tip. Brush it. Clean inside the gun with a brush and solvent. Insist particularly on threads.
Flush the gun.
Never soak the gun itself in solvent.
Use only products or solvent compatible with the parts in contact with the material (refer
to data sheet of the material manufacturer).
