6
Pressure
•
The use of pressurized air and fluids (paints or solvents)
presents risks for the user and the equipment.
•
Never exceed the maximum working pressures of the equipment,
components and accessories.
•
For all cleaning, inspection and maintenance operations on the
equipment, it is imperative to follow the procedures for
decompression, shutdown, locking of any residual pressure,
elimination of residual static electricity charges and purging of fluids.
Surfaces, edges,
corners
•
Some component surfaces may be hot during operation.
Skin contact with hot surfaces causes severe skin burns.
•
Handle open or sharp-edged components with care. Wear
protective gloves.
Equipment
modification
•
Under no circumstances should this equipment be modified or used
for purposes not intended.
•
Parts and accessories must only be supplied or approved by SAMES
KREMLIN.
•
SAMES KREMLIN cannot be held responsible for personal injury as
well as breakdowns and/or damage resulting from modifications to
the equipment.
•
Any modification of equipment made by the user and not
authorized by SAMES KREMLIN will result in loss of certification.
