12
The 1 m / 39.37" distance may be modified if trials carried out by the user deem this
necessary.
Using the grounding air hose, connect the gun to an air regulator that can supply
at least 3 bar / 43.5 psi.
Using the fluid hose, connect the gun fluid fitting to the pump. Tighten the fittings
firmly.
Note: In some particulars cases, if the air hose (4) is not conductive, the fluid hose
(3) must be conductive. One of the 2 gun hoses (air or fluid) must be condu ctive.
6.2
Installation diagram - Air pressure adjustment with or without
gauge at the gun handle
3 - P 1 : Pressure
measured at the
gun handle during
the operating (air
needles open)
4
–
Guns, models
FStart
Pressure - Suction
1 - P 0 : Pressure
2 - Air hose
