12
The 1 m / 39.37" distance may be modified if trials carried out by the user deem this
necessary.
•
Using the grounding air hose, connect the gun to an air regulator that can supply
at least 3 bar / 43.5 psi.
•
Using the fluid hose, connect the gun fluid fitting to the pump. Tighten the fittings
firmly.
Note: In some particulars cases, if the air hose (4) is not conductive, the fluid hose
(3) must be conductive. One of the 2 gun hoses (air or fluid) must be conductive.
6.2
Installation diagram - Air pressure adjustment with or without
gauge at the gun handle
3 - P 1 : Pressure
measured at the
gun handle during
the operating (air
needles open)
4 – Guns, models
FStart
Pressure - Suction
1 - P 0 : Pressure
2 - Air hose
