Index revision : C - July 2021
11
7132
1.7. Important recommendations
1.7.1. Ventilation
Do not start the powder application with the Inogun M spray gun until the spray booth ventila-
tion system is switched on. If the ventilation is switched off, toxic substances or dust may remain
in the spray booth and cause a risk of fire, poisoning or irritation.
1.7.2. O-ring seals
Use the seals recommended in this manual.
1.7.3. Ambient temperature
The spray gun is designed to normally operate at an ambient temperature comprised between
0°C and + 40°C.
The storage temperature must never 60°C.