Index revision : A
10
7129
3. Characteristics
(*) - The measurement of the viscosity of a water-soluble paint using a consistometric cup leads
to very significant errors. In effect, these paints are thixotropic: their viscosity decreases with the
intensity of agitation and with the time for which they are stirred. At rest, these paints are highly
viscous substances; in contrast, in movement, they become not very viscous substances. The
viscosities shown are indicative for paint stirred just before being measured with a cup.
(**) - Any other use is prohibited
Footprint (W x H x P)
1100 x 1640 x 650
Mass
140 Kg
Maximum operating altitude
2,000 m
Min/max ambient temperature
5°C - 40°C
Maximum relative humidity
of 80% for
temperatures of up to 31°C, then linear
decrease until 50% relative humidity at
40°C
Maximum of 80% without condensation
Operating voltage
100 kV maximum
Maximum current
500 µA max.
Electrical power supply:
- Voltage
- Frequency
- Max. power consumption (50 VA
power supply generator)
Europe version
230 V
±
10%
50 -60 Hz
200 VA
CSA Version
110V
±
10%
50 -60 Hz
200 VA
Voltage surge
Category II overvoltage according to standard IEC
61010-1:2010
Compressed air pressure
7 bars (101 psi)
±
0.5 bars
Max. air flow
Depends directly on the type of pump and the product
flow
Product viscosity
Depends on the product used
Max. product flow
According to the viscosity and the thixotropy of the
product (*) and according to the pump
Products
Non-flammable paints with a resistivity that must be
between 1k
Ω
.cm and 250 k
Ω
.cm. (**).
WARNING : Not appropriate and also dangerous for
the solvent-based paints, resistive liquids and flamma-
ble liquids that form explosive atmospheres.
