Index revision : A
16
7129
4.3.5. Connection of the product regulator
•
A product regulator control may be con-
nected to the "TR3" quick coupler D:4 at the
back of the electro-pneumatic box.
4.3.6. Connection of the high voltage
•
Step 1:
Run the generator's high voltage
cable through the cable gland in the top
left.
•
Step 2:
Connect the generator's high
voltage cable to the body of the pump at
the link for all the equipotential links.
•
Step 3:
Connect the high voltage cable
present in the Isocube cabinet from the
short-circuiter to the body of the pump at
the link for all the equipotential links.
•
Step 4:
Connect the paint points to the
pump body at the link for all the equipoten-
tial links using an equipotential wire and the
alligator clamp provided.
TR3 Quick coupler
HV cable
generator
HV cable
short-circuiter
