Index revision : A
18
7129
4.5. Start-up
WARNING : The complete start-up is done by "double clicking" the green button.
The first press
triggers the compressed air supply available for the pump and the regulator and
the ventilation of the cabinet.
This makes it possible fill, flush and/or dump the product circuit quickly, and this action is func-
tional even if the door is open or unlocked.
The second press
triggers the electricity supply for the generator and the compressed air supply
for the short-circuiter and the stirrer. The ISOCUBE is then ready to operate.
If the door is left open
or not locked, this second press has no effect.
4.5.1. Placement of the paint drum
• Place the paint drum on the receptacle in the isolating cabinet, covered in its cover. It is
important to put the cover on to avoid the hose coming out under the effect of the pres-
sure of the product.
• Make sure that there is no product dripping onto the receptacle for the drum.
4.5.2. Ventilation
Check the internal ventilation
:
• Power up the ISOCUBE cabinet.
Press the green button once. Open the
door.
• Place a finger on the ventilation outlet in
the top left of the cabinet. A slight breath
of air must be perceived (pressure 0.1 bar
+0.1 -0).
Booth ventilation
:
paragraph 3.
Ventilation
