Version B June, 2020
24
MagnaRam-SK
5 Preventative
Maintenance
MagnaRam Maintenance Schedule
Time
Period
Description
Resolve
Daily
Assure that both pumps are function correctly. Check
for leaks and single stroking.
Bleed air from pump/ rebuild if
necessary
Verify that the pumps air pressure is within range.
Adjust air regulator if required
Verify that the Elevator Up/Down pressure is within
range.
Adjust air regulator if required
Every
Drum
Change
Clean and Lubricate Follower Plate and Seals.
Clean (Lubricate) Follower Plate Vents (2 per)
Secure Drum Liner
Use tape or band
Bleed Air from Follower Plate – 2 Ports at base of Fluid
Section.
Bleed air from Fluid Section – 2 Bleeder Valve on Fluid
Section
Cycle Pump to bleed air
Check Lubricant in Packing Cup
Add if required
Weekly
Check follower plate seals for damage
Replace if necessary
Check Control Box for Leaks and pressure settings.
Verify that the vents are Clean and working properly.
Verify that the Depressurization valve is working.
Open valve and material pressure
bleeds to zero
Check for air and material leaks.
Adjust/ Tighten pump packings if required.
Clean any material on follower plate and elevator.
Check Hose Air and Material Hose routings for Wear,
Kinking and Chafing.
Replace any damaged hose
Monthly
Check Air Line filters.
Clean or replace filter elements as
required
Verify all fittings (Air and Material) are tight
Verify operation of Automatic Crossover.
Manual depress empty drum and
pumps will stop and start on
opposing pump.
Yearly
Add 60x. of S.A.E. #90W oil to the Elevator Post (4)
Bleed off air and add oil through
top cylinder air bleeder valve.
Preventative Maintenance
Summary of Contents for Magna-Ram
