Version B June, 2020
32
MagnaRam-SK
7.2.3 Elevator Guide Bushing assembly 62-3009-03.
Item Qty.
Part No.
Description
Item Qty.
Part No.
Description
1
1
72-2999-01 Guide Bushing,Magna-Ram
4
1
350-141
Bleeder Valve, 1/8NPTM
2
∆
1
82-3883-04 O-Ring, Buna 1 ½ x 1 7/8 in
5
∆
1
82-3883-05 Rod Scraper 1 ½ x 2 in.
3
∆
1
350-430
O-Ring, Buna 5 x 5 ½ in.
6
∆
1
82-3883-05 Circle Clip Internal 2 in.
-
1 62-3393-01
MagnaRam. Cylinder
Repair Kit (Guide Bushing
and Piston kit for 1
cylinder).
-
1 62-3393-04
MagnaRam, Cylinder
Repair kit (Guide
Bushing and Piston kit
for 4 cylinders).
Lubricate with Magnalube
560-440-001 PTFE Grease
6
4
1
2
3
5
Scraper
Faces
up
Dis-Assembly:
1. Using Snap Ring Pliers,
remove the Circle Clip (6).
2. Using a seal remover (Flat
Screwdriver) pry out the Rod
Scraper (5).
3. Remove the O-Rings (2,3)
4. Clean and Inspect Guide
Bushing (1).
4
5
1
3
2
6
Apply 576 Loctite Thread
Sealant and tighten.
Reference: Elevator Assembly.
Six Button Head Cap Screws 82-5298-02
Torque to: 65 Lb-Ft (88 Nm)
Assembly:
1. Replace O-Rings (2,3).
2. Install the Rod Scraper with the
scraper facing outward.
3. Install Circle Clip (6).
4. Lubricate O-Rings and Rod Scraper
with PTFE Grease. #560-440-001
5. Use Thread lock when installing
Bleeder Valve (4).
To Remove/Install the Guide
Bushing on the elevator see section:
5.2.4 Removing/ Installing the
Elevator Piston Assembly.
Summary of Contents for Magna-Ram
