Index revision : D - March 2018
7
7115
1.2. GNM 6080 control module
The
GNM 6080
control module has been installed outside of the “ATEX” zone. According to ATEX
Directive definition, it is considered “accessory hardware”.
Markings
Example: * 2014: Year of manufacturing
26: Week number
123: n
th
generator built during week 26.
WARNING : The Nanogun Airmix
®
equipment are all compliant with the operational safety
standard (i.e. Standard EN13849, level SIL 1); maintaining this level of safety requires periodic
inspections of the equipment, at least once every 5 years or 15,000 hours of operations (which-
ever comes first). This control step pertains to each of the electrical and electronic components
as well as to the set of very specific program(s); you should contact your subsidiary, distributor
or regular
SAMES KREMLIN
representative, who will inform you of the appropriate steps to
take.
DES05878
Software version:
S/N:
CE marking
2014 26123 *
DES05879
CSA marking
Version Software:
S/ N :
2014 26123 *