Use of the product
582136110-SH0060-indA-EN.docx
27/10/2020
29
9.2
Safety in production
Guards (motor cover, coupling guard, housings, ...) are
set up for safe use of the equipment.
The manufacturer can not be held responsible in case of
bodily injury as well as breakdowns and / or damage of
the material resulting from the destruction, the
occultation or the total or partial removal of the
protectors.
9.3
Start up
Pumps are tested for operation at the factory using a light weight oil
lubricant.
Before starting up, you must flush the pump with the appropriate
solvent.
At the end of the working day, carry out a flushing with the
appropriate solvent. We advice you to stop the fluid section in the
"low position" to prevent material spreading on the piston rod.
