55
Member of Exel group
DRT582094110
C - 2022/11
•
Step 4:
Reinstall the trigger (22) ensuring that the brass stop (14)
is to the rear (sectional view below).
•
Step 5:
Apply glue (Loctite 222) on the thread of the screw (21.1)
of the trigger spindle-screw assembly (21).
•
Step 6:
Reinstall the screw (21.1) and the trigger spindle (21.2) on
the trigger (22).
•
Step 7:
Tighten the seat-holder (13) in the gun with the wrench.
Tightening torque: 10 Nm / 7.376 Ft/Lbs.
During this operation, be careful to move the needle
backwards when operating the trigger (22) to prevent
from damaging the ball.
22
OK
21.2
13
22
21.1
Summary of Contents for SFlow
