61
Member of Exel group
DRT582094110
C - 2022/11
•
Step 3:
By means of the key hole (A) on the trigger protection (20)
and of the key supplied with the gun, take off the screw
(21.1) and the trigger spindle (21.2).
•
Step 4:
Remove the trigger (22).
6.4.6.2. Procedure F2: Re-assembly of the trigger (22)
•
Step 1:
Reinstall the trigger (22).
•
Step 2:
Apply glue (Loctite 222) on the thread of the screw (21.1)
of the trigger spindle-screw assembly (21).
•
Step 3:
Reinstall the screw (21.1) and the trigger spindle (21.2) on
the trigger (22).
20
A
21.2
21.1
22
1
1
2
21.2
21.1
22
1
2
2
Summary of Contents for SFlow
