10
DRT582221110
B - 2023/01
Member of Exel group
1.2.2. Standards and guidelines applied
The standards applied are as follows:
•
EN ISO 80079-36 Juin 2016 / EN ISO 80079-36 June 2016:
Non-electrical equipment for use in potentially explosive atmospheres - Methodology and requirements -
Explosive atmospheres - Part 36: non electrical equipment for use in potentially explosive atmospheres -
Methodology and requirements.
•
EN ISO 80079-37 Juin 2016 / EN ISO 80079-37 June 2016:
Explosive atmospheres - Part 37: non-electrical equipment for use in potentially explosive atmospheres - Non-
electrical protection by constructional safety ’c’, by ignition source monitoring ’b’, by immersion in liquid ’k’ -
Explosive atmospheres - Part 37: non-electrical equipment for use in potentially explosive atmospheres - Non-
electrical protection mode by constructional safety ’ch’, by ignition source monitoring ’bh’, by immersion in
liquid ’kh’.
•
EN 1127 Août 2019 / EN 1127 August 2019:
Explosive atmospheres - Explosion prevention and protection - Part 1: basic concepts and methodology.
The guidelines applied are as follows:
•
Directive ATEX 2014/34/UE / ATEX Directive 3014/34/EU:
Equipment and protective systems intended for use in explosive atmospheres.
•
SI 2016 No. 1107:
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016.
