14
DRT582221110
B - 2023/01
Member of Exel group
1.4.6. Hoses
Recommendations for hoses:
• Keep hoses away from traffic areas, moving parts and hot areas.
• Never subject the product hoses to temperatures above 60°C / 140°F or below 0°C / 32°F.
• Do not use the hoses to pull or move the equipments.
• Tighten all connections as well as the hoses and connectors before putting the equipment into operation.
• Check the hoses regularly and replace them if damaged.
• Never exceed the Maximum Working Pressure (MWP) stated on the hoses.
• For the assembly of the hoses and the gun: the wearing of PPE is mandatory.
• Tighten to the stop (Hoses and Gun).
1.4.7. Normal stop
To perform a normal stop:
• Use the air regulator to gradually depressurize the pump.
1.4.8. Materials used
Given the diversity of the materials implemented by the users and the impossibility of listing all the characteristics of
chemical substances, their interactions and their evolution over time,
Sames
cannot be held responsible:
• Poor compatibility of the materials in contact,
• Inherent risks to personnel and the environment,
• Wear and tear, malfunctions, material or equipment malfunctions as well as the quality of the finished product.
The user shall identify and prevent from potential dangers inherent to the materials used, such as:
• Toxic vapors,
• Fires,
• Explosions.
It will determine the risks of immediate or repeated exposure reactions on personnel.
With respect to the materials and paints (liquid or powder) used with its equipment,
Sames
declines any
responsability, in case of:
• Physical or psychological injuries,
• Direct or indirect material damage due to the use of chemical substances.