41
Member of Exel group
DRT582221110
B - 2023/01
6.4.9. Procedure E1: Disassembly of the trigger (5)
•
Step 1
:
Loosen the screw (5.1) by means of a 5.5 mm wrench.
•
Step 2
:
Remove the trigger spindle (5.2).
•
Step 3
:
Remove the trigger (5.3).
6.4.10. Procedure E2: Reassembly of the trigger (5)
•
Step 1
:
Apply glue (Loctite 222) to the screw thread (5.1).
•
Step 2
:
Place the trigger (5.3) and the trigger spindle (5.2).
•
Step 3
:
Tighten the screw (5.1).
5.1
5.2
5.3
5.1
5.2
5.3
