Index revision : C - March 2016
40
7105
10.12. Barrel
•
Step 1
: Remove the trigger
see § 10.8 page 36
, and the paint needle.
•
Step 2
: Unscrew the four screws fastening the barrel on the handle.
•
Step 3
: Unscrew manually or with a small flat pliers the three connection wires of the high voltage
unit, pull carefully the contacts towards the back.
•
Step 4
:
Replace the o-rings of the air ducts
and the air valve (Step 3: not obligatory)
:
Remove and replace the three o-rings.
•
Step 5
:
Replace the o-ring barrel/handle
(Step 3: obligatory)
: Remove and replace the o-
ring.
Replace this o-ring every year.
•
Step 6
:
Replace the o-ring back of paint nee-
dle
: Remove and replace the o-ring.
For reassembling follow the steps in reverse order.
Step 4
Step 5
Step 6
