31
Member of Exel group
DRT7159
B - 2023/03
8.4.4. Procedure C4: Fast Clean replacement
•
Step 1
: Disconnect the hose from the Fast Clean.
•
Step 2
: Unscrew the 2 screws (A) securing the Fast
Clean and remove it.
•
Step 3
: Insert the new Fast Clean, tighten the 2
screws (A) and then reconnect it.
8.4.5. Procedure C5: Replacement of the equipped porous washer
Disassembly:
•
Step 1
: Using soft rubber clamps, textile protection or thick cardboard, clamp the aluminium body of the tube
in a vice and unscrew the outer tube manually.
The inner tube remains attached to the body.
•
Step 2
: Using a 20 to 30 mm diameter bar of sufficient length (broomstick style), remove the black nose from
the outer tube:
Tube laid flat on a work surface, passing through the inside of the tube, hit the nose with the rod.
Repeat if necessary.
Reassemble the equipped porous washer:
•
Step 3
: Put the inner tube and the aluminium body back into the outer tube.
•
Step 4
: Using a mallet, insert the aluminium body into the outer tube. Leave a gap of +/-0.5 mm between the
shoulder of the body and the tube.
•
Step 5
: Place the nose assembly tool (P/N: 900020525) on the work surface or on the floor.
•
Step 6
: Place the new nose on the tool with the porous washer down.
A
Summary of Contents for Inocart VT
