16
Member of Exel group
DRT7133
D - 2023/01
2. Introduction
The
Inogun A
projector is an automatic projector designed to project powder paint. An
ionizing electrode at the end of the projector is set to a high negative electrical potential. Due to the high electric field
at the end of this electrode, it creates negative gas ions. These ions allow the powder paint to be sprayed during its
transfer from the end of the projector to the part to be painted, which is itself connected to the ground.
The
Inogun A
projector is connected to an
Inocontroller
or
Inobox
control module that controls both the high
voltage and the powder output of the projector connected to it. These two indissociable elements constitute a
powder coating equipment.
Pre-programmed voltage and current settings can be adjusted from the
Inocontroller
or
Inobox
control module.
Inogun A
projectors are of two types:
• The FCC
Inogun A
projector is used in a powder coating booth with quick colour change.
• The
Inogun A
projector in the standard version is used in all other cases. It can be installed either on a
reciprocator robot via its support arm or on a 6-axis robot via a robotic support.
There are 3 versions of robotic support:
• 60° support for a projector.
• Twin convergent 60° support for two projectors
• 60° Twin parallel 60° support for two projectors.
Inogun A FCC
Inogun A
Summary of Contents for inocoat Inogun A
Page 1: ...Instruction manual DRT7133 D 2023 01 Inogun A FCC Standard and Robotic Versions...
Page 78: ...78 Member of Exel group DRT7133 D 2023 01 10 Appendices 10 1 Preventive maintenance plan...
Page 82: ...79 DRT7133 D 2023 01 Member of Exel group 10 2 EU and UK declarations of conformity...
Page 87: ...Sames 13 Chemin de Malacher 38240 Meylan France 33 0 4 76 41 60 60...