Index revision : H
29
6336
6.12. Screen ”H”
It is used to select the type of characteristics U/I
1
or U/I
2
.
U/I
1
type is the most common one.
The electrostatic power is the highest one. It allows painting a part even at a far distance.
U/I
2
type allows reducing the electrostatic power when the operator moves away from the part. This type
of characteristics avoids the hand of the operator to be covered with paint.
WARNING : With U/I2, the part has to be painted at a maximum distance of 300 mm otherwise,
the electrostatic effect is weakened.
[
[
1
1
]
]
: This button allows selecting U/I
1
or
U/I
2
characteristics.
Pressing this button moves a flashing pointer
in front of the using mode.
[
[
2
2
]
]
:This button enables
switching to the following
menu or positioning on the
cleaning screen by pressing
the button for more than two
seconds.
the operator has access to the next
menu,“A”.
Immediate return to screen “A” if the trigger is
pressed.
1
1
2
2
