Revised A
52
6301
6. Assembly and disassembly (continued)
6.2 Bellcup, clip and distributor 65 EC version (continued)
6.2.4. Assembly (bellcup and clip)
SAFETY : To avoid injury, it is recommended to wear rubber gloves or to use a rag to install the
bellcup and clip assembly.
• Step 1: Secure the clip to the bellcup by turning the tool clockwise by hand.
• Step 2: Place the opened clamp to close the grip around the bellcup and tighten the bell-
cup onto the clip.
• Step 3: Press the bellcup and clip assembly to the turbine motor making sure it is well secured.
Step 2
Step 1
DES01503
