CHARGING
Connect the device to a computer or laptop with the USB
magnetic charging cable for charging. Insert the charging
thimbles of the charger into the charging points positioned in
the back of your device. Kindly use only the USB cable
included with the wearable. If you use a power adapter for
charging, the output of the power adapter should be 5V, 1A.
Charging time: 2 hours. Please charge the device fully before
using it.
NOTE: Do not have the charger connected to AC and the
magnets touching any metallic surface, this will create a high
heating of the cable and will damage it.
HOW TO POWER ON / POWER OFF?
1)
To turn ON the smart band, long press the Power On/Off
button for few seconds to make it Power On.
2)
To turn OFF the smart band, long press the Power On/Off
button for few seconds until the Power OFF icon displays,
then select Yes to make it Power Off; or on the
touchscreen, tap and slide from left to right to find the
Power OFF icon, tap in the Power Off icon, select Yes to
make it Power Off. You can also power off your device by
sliding in the home screen from left to right to display the
different menus, then slide from bottom to top until you
find the Power OFF icon, tap in the Power Off icon, select
Yes to make it Power Off.
