Model:
ST-1000 PTO or ST-1250 PTO
Serial no:
……………………………………….……........
Seller:
…………………………………………….........
Seller address:
……………………………………………………
Phone:
…………………………………………………….
INTENDED PURPOSE AND WORKING PRINCIPLE
The attachment must be used only for the purposes indicated herein.
Area of application
The salt spreaders are designed attaching to a tractors 3 point hitch. The PTO shaft is
connected to the tractor’s PTO system. The salt spreaders work can be controlled from the
tractor’s cab. The area of operation should be clear of persons while the attachment is in
use.
LED lights, PVC cover and extension set are available as extras.
Operating principle
The attachment is mounted to the tractor’s coupling device (adaptor). For all types, the salt
is spread using a spreading roller rotated by the PTO shaft. The amount of salt can be
adjusted by driving speed / PTO speed.
The spreading roller must rotate according to arrow direction.
Equipment
Always use original parts.
SAFETY INSTRUCTION
READ BEFORE OPERATION!
These are general safety instructions. Any other relevant occupational safety instructions,
traffic rules and generally applicable regulations must also be respected when using the salt
spreader. These instructions do not relieve the tractor driver from the obligation to respect
statutory and other traffic safety and occupational safety regulations. The operator must
comply with safety instructions for various operating sites and any rules based on traffic
regulations. The design of tractors already takes account of the safety regulations for
tractor’s established by the occupational safety authority. The following is an overview of