background image

 
 
 
 

 

TROUBLESHOOTING 

Problem  

Possible cause  

Solution  

No salt is dispensed  

Spreading shaft has warn off 

Replace the spreading shaft 

No salt is dispensed  

The salt is frozen or very wet 

Check the salt quality 

Too much salt is dispensed  

The rubber has worn out  
 

Replace the rubber  

The spreader’s shafts don’t 
rotate, but the PTO shaft 
rotates 
 

Check the chain. It might be 
broken 

Replace the chain 

 
 
WARRANTY TERMS 

Warranty for SAMI products is valid 12 months from the date of purchase. 

-

 

Material and manufacturing defects that occur during the warranty period are covered 
by the warranty.  

-

 

When a defect occurs, please contact authorized distributor whom you bought the 
product  

-

 

Please send to distributor serial number and/or year of manufacture of the product (see 
the manufacturer’s data plate) together with photos, videos and detailed description of 
the defect. Evidence material must contain Photographs of label, of problematic place 
and of product in full.  

-

 

Distributor communicates the producer and informs the client about made decision.  

-

 

In need distributor may ask from the client to send additional information or defected 
part.  

-

 

All warranty cases 

accepted

 

by SAMI AS

 will be compensated by producer. 

-

 

The manufacturer either repairs or replaces or compensates the defective parts. 

-

 

Sub-contracted part’s warranty is provided by their manufacturer. 

The warranty excludes: 

-

 

Consumables (e.g. blades, etc) 

-

 

Downtime or any other consequential loss or damage 

-

 

Transport costs (travel and freight costs) 

-

 

Overtime pay or mission allowances 

-

 

Any damage caused by operation in a negligent manner or exceeding the approved 
specifications detailed in this manual is excluded. 

The warranty excludes damage resulting from: 

Summary of Contents for ST-1000 PTO











Reviews: