CHARGING
Connect the device to a computer or laptop with the USB
Magnetic cable for charging. Put in contact the magnetic
end of the usb cable with the charging points positioned in the
back of your device. Kindly use only the USB cable included
with the wearable. If you use a power adapter for charging,
the output of the power adapter should be 5V, 1A. Charging
time: 2 hours. Please charge the device fully before using it.
Take care with the magnet side of the cable, if you connect
to the AC and you have contact with a metal surface, you
may damage the charging cable.
NOTE: Do not have the charger connected to AC and the
magnets touching any metallic surface, this will create a high
heating of the cable and will damage it.
HOW TO POWER ON / POWER OFF?
1)
To turn ON the smart band, on the screen, long press the
touch button (fixed-point touch control) for a few seconds.
The touch button is situated on the bottom of the screen.
2)
To turn OFF the smart band, in the home screen menu long
press the touch control area for a few seconds until the
device info displays on the screen, then long press the
touch control button again until the power off menu
displays. Short tap the touch control button to select
power off, then long press the touch button to make it
power off. There is another way to power off your smart
band: in the home screen menu short press the touch
