www.larius.com
15
L400
REV.
02 - 02/2020 - Cod. 150085
Symmetrical trace of spraying a fluid
using air.
No tail-end is formed.
Trace of spraying a fluid at low-pressure
without using air.
ADJUSTING SPRAYING NOZZLE
• The spraying nozzle can be adjusted according to need by set
-
ting the pump operating pressure and the atomization pressure
until reaching the required operating conditions.
• For proper spraying of the product, the air and paint coming out
of the gun must leave a spraying trace without tails.
• At this point, the product will flow until reaching the gun and
you can start working.
TRIGGER LOCK DISENGAGED
To disengage the trigger lock
(Q2)
, rotate the trigger lock backward.
TRIGGER LOCK ENGAGED
To engage the trigger lock, release the trigger and rotate the
trigger lock
(Q1)
forward.
Never point the spray gun at yourselves or at other
people. The contact with the casting can cause
serious injuries. In case of injuries caused by
the gun casting, seek immediate medical advice
specifying the type of the product injected.
A
B
Safety engaged
Safety disengaged
Q2
Q1
