www.larius.com
21
L400
REV.
02 - 02/2020 - Cod. 150085
• Remove the gasket
(R53
) from the gun
(R54)
by using a pointed
screwdriver
(R55)
. Replace the worn gasket with a new spare one.
• Assemble the gaskets of the air valve
(R56)
. Place the gasket
(R57)
in its seat
(R58)
as shown.
• Insert the gasket
(R59)
inside the air valve
(R60)
making sure it
is duly placed as shown in the picture.
• Place the gaskets ring
(R61)
inside the air valve
(R62).
• Place the air control needle
(R63)
inside the air valve
(R64)
and
assemble the whole group insde the gun body
(R65).
Before inserting the air valve, lubricate the valve
surface with grease (P64) as shown in the pre-
vious picture.
During assembling, pay attention to the direction
of the gasket (P57) which should be placed as
shown in the picture above.
R55
R54
R53
R56
R58
R57
R59
R60
R61
R62
R65
R64
R63
