www.larius.com
23
L400
REV.
02 - 02/2020 - Cod. 150085
• Use pointed pliers
(P81
) to remove the elastic ring
(P82)
.
Then,
completely loose the screw
(P83)
and remove it from the
bushing (P84).
• The gasket
(P86)
is placed inside the bushing
(P85)
.
Use a sui-
table tool to remove the worn gasket and replae it with a new
spare one
(P87)
.
At this point the procedure for the bushing gasket replacement is
completed. Reassemble the gun following the previous procedure
in reverse order.
REPLACE THE PRODUCT HOUSE GASKET
ATTENTION: f
or further details, please refer to the drawing on
page 22
To replace the product house gasket, porceed as follows:
• Remove the screw
(P88)
of the house supporting bracket by
using the suitable wrench
(P89)
.
• Remove the revolving fitting
(P90).
• Use a suitable wrench
(P93)
to loose the hex nut
(P92)
and then
remove the product house
(P91)
.
R83
R82 R81
R83
R84
R85
R87
R86
R88
R89
R93
R92
R91
R90
