www.larius.com
3
GHIBLI 30:1/40:1
REV.
. 01 - 03/2020 - Cod. 150088
B
C
Parts of the pump in contact with the material
Pumping group: galvanised carbon steel and aluminium or
stainless steel (based on the versions)
Sealing balls: stainless steel AISI 420B
Gaskets: PTFE + polyethylene
Other parts of the pump
Motor casing and motor piston: aluminium
Pneumatic motor piston rod: stainless steel
Trolley structure: painted sheet metal
*N.B.
The pump is supplied with a bayonet connection.
WORKING PRINCIPLE
GHIBLI 30:1 and 40:1
pumps are pneumatic pumps for high
pressure painting without the use of compressed air (AIRLESS).
The stainless steel version is particularly suitable for use with
water-based paints. The Ghibli pump is essentially comprised
of an air motor and a structure known as the “Material Pumping
Unit”, or simply the “Pumping Unit”.
In the pneumatic motor, compressed air causes the vertical
reciprocating movement of the motor piston; this movement is
transmitted through a connecting rod to the material pumping
piston.
This allows for the material to be aspirated and pushed towards
the outlet. The unit comes complete with a transportation trolley, a
high-pressure material filter, an air supply regulator for the pump, a
material suction tube (complete with filter) and a recirculation tube.
The ratio 30:1 or 40:1 means that the outlet pressure of material
is 30 or 40 times higher than the pump feed air pressure.
TECHNICAL DATA
Always observe these instructions carefully
when evaluating the product compatibility and
in case of disposal of some parts of the pump no
more usable, in order to meet the environmental
regulations on recycling process.
GHIBLI 30:1
GHIBLI 40:/1
Maximum delivery
3,8 l/m
2,8 l/m
Maximum infeed air pressure
7 bar
6,5 bar
Max. working pressure
210 bar
260 bar
*Airfeed inlet
1/2” GAS (F)
1/2” GAS (F)
Material entry
3/4" GAS C (M)
3/4" GAS C (M)
Material exit
3/8" GAS C (F)
3/8" GAS C (F)
Air consumption
3 bar 400 l/m
3 bar 400 l/m
5 bar 800 l/m
5 bar 800 l/m
7 bar 850 l/m
6,5 bar 850 l/m
Sound pressure level
< 80 dB (A)
< 80 dB (A)
Motor diameter
180 mm (4 1/4")
180 mm (4 1/4")
Piston stroke
102 mm (4")
102 mm (4")
c.c. Cycle
60
45
N° cycles per minute
60
60
N° cycles per liter
16
22
Seals
PTFE + Polietilene
PTFE + Polietilene
Weight
25 kg
25 kg
Height
930 mm
930 mm
Width
450 mm
450 mm
Depth
450 mm
450 mm
