www.larius.com
13
L100 - L101
REV.
12 - 09/2021 - Cod. 150083
TRASPORT AND
UNPACKING
F
• THE EMPLOYER SHALL TRAIN ITS EMPLOYEES ABOUT ALL
THOSE RISKS STEMMING FROM ACCIDENTS, ABOUT THE
USE OF SAFETY DEVICES FOR THEIR OWN SAFETY AND
ABOUT THE GENERAL RULES FOR ACCIDENT pREVENTION
IN COMpLIANCE WITH INTERNATIONAL REGULATIONS
AND WITH THE LAWS OF THE COUNTRY WHERE THE pLANT
IS USED.
• THE BEHAVIOUR OF THE EMPLOYEES SHALL STRICTLY
COMpLY WITH THE ACCIDENT pREVENTION AND ALSO
ENVIRONMENTAL REGULATIONS IN FORCE IN THE COUNTRY
WHERE THE pLANT IS INSTALLED AND USED.
• KEEP YOUR WORK PLACE CLEAN AND TIDY. DISORDER
WHERE YOU ARE WORKING CREATES A pOTENTIAL RISK
OF ACCIDENTS.
• The manufacturer will not be responsible for the unloading
operations and transport to the workplace of the machine.
• Check the packing is undamaged on receipt of the equipment.
Unpack the machine and verify if there has been any damage
due to transportation.
• ALWAYS KEEP PROPER BALANCE AVOIDING UNUSUAL
STANCE.
• BEFORE USING THE TOOL, ENSURE THERE ARE NOT
DAMAGED pARTS AND THE MACHINE CAN WORK
pROpERLY.
• ALWAYS FOLLOW THE INSTRUCTIONS ABOUT SAFETY AND
THE REGULATIONS IN FORCE.
• KEEP THOSE WHO ARE NOT RESPONSIBLE FOR THE
EQUIpMENT OUT OF THE WORK AREA.
• NEVER EXCEED THE MAXIMUM WORKING PRESSURE
INDICATED .
• NEVER POINT THE SPRAY GUN AT YOURSELVES OR AT
OTHER pEOpLE. THE CONTACT WITH THE CASTING CAN
CAUSE SERIOUS INJURIES.
• IN CASE OF INJURIES CAUSED BY THE GUN CASTING, SEEK
IMMEDIATE MEDICAL ADVICE SpECIFYING THE TYpE OF
THE pRODUCT INJECTED. NEVER UNDERVALUE A WOUND
CAUSED BY THE INJECTION OF A FLUID.
• ALWAYS DISCONNECT THE SUPPLY AND RELEASE THE
pRESSURE IN THE CIRCUIT BEFORE pERFORMING ANY
CHECK OR pART REpLACEMENT OF THE EQUIpMENT .
• NEVER MODIFY ANY PART IN THE EQUIPMENT. CHECK
REGULARLY THE COMpONENTS OF THE SYSTEM. REpLACE
THE pARTS DAMAGED OR WORN.
• TIGHTEN AND CHECK ALL THE FITTINGS FOR CONNECTION
BETWEEN pUMp , FLExIBLE HOSE AND SpRAY GUN BEFORE
USING THE EQUIpMENT.
• ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH
STANDARD KIT. THE USE OF ANY ACCESSORIES OR TOOLING
OTHER THAN THOSE RECOMMENDED IN THIS MANUAL,
MAY CAUSE DAMAGE OR INJURE THE OpERATOR.
• THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN BE VERY
DANGEROUS . HANDLE THE FLExIBLE HOSE CAREFULLY.
DO NOT pULL THE FLExIBLE HOSE TO MOVE THE
EQUIpMENT. NEVER USE A DAMAGED OR A REpAIRED
FLExIBLE HOSE.
The disposal of packaging materials is a
customer’s competence and must be performed
in accordance with the regulations in force in the
country where the plant is installed and used.
It is nevertheless sound practice to recycle
packaging materials in an environment-friendly
manner as much as possible.
SAFETY RULES
G
Read carefully and entirely the following instructions
before using the product.
Please save these instructions in a safe place.
The unauthorised tampering/replacement of one
or more parts composing the machine, the use of
accessories, tools, expendable materials other than
those recommended by the manufacturer can be a
danger of accident.
The manufacturer will be relieved from tort and
criminal liability.
In case of damage, call immediately LARIUS and the Shipping
Agent. All the notices about possible damage or anomalies
must arrive timely within 8 days at least from the date of receipt
of the plant through Registered Lettre to the Shipping Agent
and to LARIUS.
