www.larius.com
11
L200 - L201
REV.
01 - 01/2020 - Cod. 150084
• THE EMPLOYER SHALL TRAIN ITS EMPLOYEES
A B O U T A L L T H O S E R I S K S S T E M M I N G
FROM ACCIDENTS, ABOUT THE USE OF SAFETY
DEVICES FOR THEIR OWN SAFETY AND ABOUT
T H E G E N E R A L R U L E S F O R A C C I D E N T
P R E V E N T I O N I N C O M P L I A N C E W I T H
INTERNATIONAL REGULATIONS AND WITH THE LAWS OF
THE COUNTRY WHERE THE PLANT IS USED.
• THE BEHAVIOUR OF THE EMPLOYEES SHALL
S T R I C T LY C O M P LY W I T H T H E A C C I D E N T
P R E V E N T I O N A N D A L S O E N V I R O N M E N TA L
REGULATIONS IN FORCE IN THE COUNTRY WHERE THE
PLANT IS INSTALLED AND USED.
• KEEP YOUR WORK PLACE CLEAN AND TIDY.
DISORDER WHERE YOU ARE WORKING CREATES A
POTENTIAL RISK OF ACCIDENTS.
• The manufacturer will not be responsible for the unloading
operations and transport to the workplace of the machine.
• Check the packing is undamaged on receipt of the equipment.
Unpack the machine and verify if there has been any damage
due to transportation.
In case of damage, call immediately LARIUS and the Shipping
Agent. All the notices about possible damage or
anomalies must arrive timely within 8 days at least from the
date of receipt of the plant through Registered Letter to the
Shipping Agent and to LARIUS.
• ALWAYS KEEP PROPER BALANCE AVOIDING UNUSUAL
STANCE.
• BEFORE USING THE TOOL, ENSURE THERE ARE NOT
DAMAGED PARTS AND THE MACHINE CAN WORK PROPERLY.
• ALWAYS FOLLOW THE INSTRUCTIONS ABOUT SAFETY AND
THE REGULATIONS IN FORCE.
• KEEP THOSE WHO ARE NOT RESPONSIBLE FOR THE
EQUIPMENT OUT OF THE WORK AREA.
• N E V E R E X C E E D T H E M A X I M U M W O R K I N G
PRESSURE INDICATED .
• NEVER POINT THE SPRAY GUN AT YOURSELVES
OR AT OTHER PEOPLE. THE CONTACT WITH
THE CASTING CAN CAUSE SERIOUS INJURIES.
• IN CASE OF INJURIES CAUSED BY THE GUN
CASTING, SEEK IMMEDIATE MEDICAL ADVICE
SPECIFYING THE TYPE OF THE PRODUCT
INJECTED. NEVER UNDERVALUE A WOUND
CAUSED BY THE INJECTION OF A FLUID.
• A LW AY S D I S C O N N E C T T H E S U P P LY A N D
RELEASE THE PRESSURE IN THE CIRCUIT
BEFORE PERFORMING ANY CHECK OR PART
REPLACEMENT OF THE EQUIPMENT .
• NEVER MODIFY ANY PART IN THE EQUIPMENT.
CHECK REGULARLY THE COMPONENTS OF THE SYSTEM.
REPLACE THE PARTS DAMAGED OR WORN.
• TIGHTEN AND CHECK ALL THE FITTINGS FOR
CONNECTION BETWEEN PUMP, FLExIBLE HOSE
AND SPRAY GUN BEFORE USING THE EQUIPMENT.
• ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH
STANDARD KIT. THE USE OF ANY ACCESSORIES OR
TOOLING OTHER THAN THOSE RECOMMENDED
IN THIS MANUAL, MAY CAUSE DAMAGE OR
INJURE THE OPERATOR.
• T H E F L U I D C O N TA I N E D I N T H E F L E X I B L E
H O S E C A N B E V E R Y D A N G E R O U S .
H A N D L E T H E F L E x I B L E H O S E C A R E F U L LY.
DO NOT PULL THE FLExIBLE HOSE TO MOVE
THE EQUIPMENT. NEVER USE A DAMAGED OR
A REPAIRED FLExIBLE HOSE.
TRANSPORT AND
UNPACKING
F
The disposal of packaging materials is a
customer’s competence and must be performed
in accordance with the regulations in force in the
country where the plant is installed and used.
It is nevertheless sound practice to recycle
packaging materials in an environment-friendly
manner as much as possible.
SAFETY RULES
G
Read carefully and entirely the following
instructions before using the product.
Please save these instructions in a safe place.
The unauthorised tampering/replacement of one
or more parts composing the machine, the use
of accessories, tools, expendable materials other
than those recommended by the manufacturer
can be a danger of accident.
The manufacturer will be relieved from tort and
criminal liability.
