STAR 3001W GUN
Ed.
010 - 07/2020
www.larius.eu
9
INJECTION HAZARD
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin.
To help prevent injection, always:
- Engage trigger lock when not spraying.
- Do not put your hand over the spray tip. Do not stop or deflect leaks with your hand, body or other.
- Do not point gun at anyone or at any part of the body.
- Never spray without tip guard.
- Ensure the trigger is locked at the end of spraying procedure.
- Do pressure relief at the end of spraying procedure and before any service operation.
- NEVER use components whose operating pressure is below the Maximum Working Pressure.
- Never allow children use this unit.
- Pay close attention to the possible recoil during gun triggering.
- Hazardous fluids or toxic fumes can cause serious injury or death if sprayed in the eyes or on skin, inhaled
or ingested.
- Obtain information on the specific hazards of the fluids in use. Read the fluid supplier’s warnings.
If high pressure fluid pierces your skin, the injury might look like “just a cut”, but it is a serious wound! Get
immediate medical attention.
Always wear suitable protective clothing as gloves, goggles and face shield.
Wear protective clothing duly complying with the safety standards in force in the country in which the equipment
is used.
Do not wear bracelets, earrings, rings, chains, or anything else that may hinder the operator’s work.
Do not wear clothing with wide sleeves, scarves, ties, or any other piece of clothing that could get tangled up in
moving parts of the equipment during the work, inspection, or maintenance cycles.
A
TRANSPORT AND
UNPACKING
The disposal of packaging materials is at custo-
mer’s charge and must be performed in accordance
with the regulations in force in the country where
the equipment is installed and used.
It is nevertheless sound practice to recycle packa-
ging materials in an environment-friendly manner
whenever possible.
•
The manufacturer will not be responsible for the unloa-
ding operations and transport of the equipment to the
workplace.
• Check the packing is undamaged on receipt of the
equipment.
Unpack the equipment and verify it is free from any
damage occured during transport.
In case of damage, immediately contact
LARIUS
and the
Shipping Agent. All the notices reporting any damage or
anomalies must arrive timely within 8 days at least from
the date of receipt of the equipment through Registered
Letter to the Shipping Agent and to
LARIUS
.
B
SAFETY RULES
• THE EMPLOYER SHALL TRAIN ITS EMPLOYEES ABOUT
ALL THOSE RISKS STEMMING FROM ACCIDENTS, ABOUT
THE USE OF SAFETY DEVICES FOR THEIR OWN SAFE-
TY AND ABOUT THE GENERAL RULES FOR ACCIDENT
PREVENTION IN COMPLIANCE WITH INTERNATIONAL
REGULATIONS AND WITH THE LAWS OF THE COUNTRY
WHERE THE EQUIPMENT IS USED.
• THE BEHAVIOUR OF THE EMPLOYEES SHALL STRICTLY
COMPLY WITH THE ACCIDENT PREVENTION AND ENVI-
RONMENTAL REGULATIONS IN FORCE IN THE COUNTRY
WHERE THE EQUIPMENT IS INSTALLED AND USED.
Read carefully and entirely the following instructions
before using the product.
Please save these instructions in a safe place.
The unauthorised tampering/replacement of one
or more parts composing the machine, the use of
accessories, tools, expendable materials other than
those recommended by the manufacturer can be
a danger of accident.
The manufacturer will be relieved from tort and
criminal liability.
