www.larius.com
20
THOR
ED.
17 - 09/2020 - Cod. 150096
Fig. 10J
Fig. 11J
Fig. 13J
Fig. 12J
Open
J6
J1
J2
OFF
J3
• When washing heavy products
(such as gypsum, etc.)
, we
recommend washing with running water that is not stored,
in order to avoid deposits inside the equipment.
CLEANING FOR WATER-BASED PRODUCTS
•
Reduce pressure to the minimum
(turn counterclockwise the
pressure control knob
(
J1
)
)
.
•
Press the switch (
J2
) placed on the box of the electric motor,
to stop the equipment.
•
Hold the spray gun trigger down.
• Open the circulation tap (
J3
) to discharge the pressure in the
circuit
.
Refit the valve and tighten the upper part (j6)
completely.
Make sure that the electrical system is earthed
and complies with regulations.
