background image

Period 4.

SET

TIME

PM

MO

PROG

SET

TIME

PM

MO

PROG

SET

TIME

AM

MO

PROG

ROOM

SET

TIME

AM

SU MO TU WE TH FR SA

PROG

ROOM

SET

TIME

AM

MO 

PROG

ROOM

SET

TIME

AM

MO 

PROG

SET

TIME

AM

MO

PROG

Set period day.
Days of week flash.

Set temperature.
Set and temperature
flash.

Period 2.

Period 1.

Period 3.

Set hours.
Time and hours flash.

Set minutes.
Time and minutes flash.

Page 12.

Page 7.

Programming button function

T

P

T

P

Time

Program

Indicates time and day of the week
programming (must press and hold for 2
or more seconds when thermostat is off).

Indicates the programming mode (must 
press and hold for 2 or more seconds 
when thermostat is off).

Functions

Button                   Function                    Description

PWR

OK

UP

DOWN

PWR

UP

DOWN

OK

Switches the thermostat on.
If the thermostat is off, pressing and 
releasing the PWR and OK button 
together will turn the thermostat on to 
the most recently selected working mode.

On

Accepts the current function and
advances the next function.

Increment hours, minutes, day or 
temperature.

Decrement hours, minutes, day or 
temperature.

Enter

Button Functions

PWR

OK

A / M

Automatic
/ Manual

Toggles between automatic and manual
mode.

A/M

PWR

Off

Switches the unit off.

Programming Display Settings

Summary of Contents for Cannon











Reviews: