3
INSTALLATION INSTRUCTIONS
10
I.
Connect one end of the Negative cable to the Negative terminal of the inverter usually Black in Color
J.
Connect the other end of the Negative cable to the battery Negative terminal stud usually denoted
by the ‘-’ sign.
K.
Please ensure that all the connections are tight.
DC-3500-KIT
A.
Identify the Positive & Negative Cables:
Positive cable: Terminal lugs at each end are covered with Red heat shrink as in Fig. 3.13.
Negative cable: terminal lugs at each end are covered with Black heat shrink as in Fig. 3.14.
B.
The Class T Fuse Assembly (Fig. 3.15) consists of the following components assembled as one unit:
Fig. 3.12. Installed arrangement
Fig. 3.13. Positive cable end
Fig. 3.14. Negative cable end
